Make a dormant container for dog food

February 20, 2023
Dog Food Container
Make a dormant container for dog food

Make a feeder for cats with your own hands

Automatic feeder – a device for feeding a cat without a person’s presence. It is a large plastic container, different in shape and size, which the owner fills with dry or humid food.

A device that allows you to issue a dosed amount of food to an animal is connected to the container. The feed mechanism can be varied:

  • In the form of a round container with a lid divided into segments, which are filled with food for one trick;
  • Trays with lids opening at the timer signal;
  • Dosed feed from a large container into a bowl.

The main varieties

Manufacturers offer a diverse assortment of animal feeding devices. These can be electrical feeders and devices of the mechanical principle of action, complex electronic systems with control over the Internet and smart feeders (core feeders)ch assistants provide a pet from a day to several weeks (depending on the amount of feed).

Mechanical

The proposed Triol model belongs to the simplest mechanical versions. It is intended for feeding fluffy exclusively dry food, filling the capacity of the cat immediately after feeding. Therefore, the diet, of course, suffers. To use this device will often not benefit the cat, but in rare cases, the feeder will justify itself.

Electronic

The most popular among this group are Feed Ex. This is a rather complex device equipped with electronics. The display displays all information on the mode of operation and its programming is carried out. Some devices are equipped with a sensor that reacts to the approach of an animal with a bravoca on a collar.

With different compartments

Meshs with several compartments allow you to feed the cat with different food. In compartments, wet, dry food, canned food can be stored. Their storage is supported by a built-in ice capacity that preserves pre-prepared portions no worse than the refrigerator. The model is made of food plastic and is easily washed. Sales leaders are CAT MATE C50, Sititek Pets.

Managed remotely

Currently, remote-controlled feeders have become especially popular. Their advantage over the rest is that the owner can regulate the feed supply via the Internet. The program set on a smartphone or computer will ensure constant communication with the possibility of guaranteed receiving the right amount of food for the cat at the appointed time. By purchasing feeders of the PETNET SmartFeeder model, you can safely leave your pet alone for a long period of time.

Model with timer

The Feet Ex model is a large plastic container with a bowl-shaped lid divided into a number of compartments. They rotate in a circle, opening at a given time. This feeder can be used with both dry and wet food and is designed to last 60-90 days.

The automatic feeder is equipped with a timer that gives access to food with a time interval from an hour to a day. Portions in this case can be from 60 to 350 grams. A feature of these models is the presence of a container for ice, which allows you to store the best storage container for a long time. Another important advantage is the equipment with an audible signal, which announces the meal with the voice of the owner.

Puzzle bowl

If you are actively engaged in training with a cat, get a unique puzzle feeder with labyrinths. She is able not only to feed the cat, but also make her show intellectual abilities.

A smart toy will give you the opportunity to play actively, and for your ingenuity you will be rewarded with food. However, before leaving the animal alone, make sure that the cat is up to the task. Similar designs are offered by Cat it Senses.

Feeder with dispenser

The cat food dispenser is very convenient and efficient to use. The principle of operation of the installation is as follows: at a predetermined time, the dispenser opens the container, and the right amount of feed falls into the bowl. After that, the container is closed.

The convenience of the device lies in the fact that all the food in the container is not exposed to moisture, as it is tightly closed with a lid. The Ferplast Zenith model also provides reliable protection against an animal that decides to eat unscheduled.

Advantages and disadvantages

We note the many advantages of such devices:

  • Ease of operation, ease of maintenance;
  • The ability to use compartments for different types of food:
  • Availability of power supply in automatic feeders from the mains, batteries or accumulators;
  • A wide range of tray sizes;
  • Compactness, stability, mobility;
  • The presence of a timer allows feeding at the right time:
  • Some types of structures are prudently supplied with a drinker;
  • Electronic devices allow you to record the sound signal with the voice of the owner.

Reliable assistants to pets have no shortcomings except their high cost.

How to do it with your own hands

A similar feeder can be done with your own hands. Of course, she will be primitive, but a couple of days will confidently “feed” the cat. For manufacture you will need:

  • Wooden board (you can use a cutting kitchen board);
  • Several disposable cups are different in shape and size (can be replaced with cut plastic bottles);
  • Screws.

How to make an auto feeding with your own hands?

Such a device is easiest to purchase in the finished form. However, it can be done independently, especially since it will not take much time and will not require significant financial costs.

The easiest way to build an elementary mechanical best storage container. By putting very little effort, you can please the four-legged pet with interactive or smarties for feeding. Information on how to independently make an automatic feeder for a cat:

  1. Having cut off the bottom of one of the bottles, cut out a pallet from it in the likeness of a scoop. In the front, you need to leave the sides, remove them half on the sides, in the back – completely remove.
  2. In the second bottle, cut a small hole at the very bottom of the same height as the sides of the pallet.
  3. Having placed a pallet into it, attach it to the bottom of the bottle with glue or cord. It is also necessary to combine with the main capacity of the edge of the sides of the pallet.
  4. Fill the container with food. Having devastated, the pallet will again be filled with it under the influence of gravitational force.
  1. With a randomly placing container on the board, attach them to it with screws.
  2. Fill each of them with dry food. In them it is necessary to place exactly as many granules as it is supposed to eat a cat at a time.

At first, the pet will devastate those containers from which it is easiest to get food, and only after that they will take a deeper container.

  1. Cut off the neck at the bottle.
  2. Pierce the bottom of the container with an awl.
  3. Closing it with a lid, pierce it.
  4. Having pierced the ball with wire, attach an elastic band to it.
  5. Having stretched through the holes in the bottle, container and its lid, fix it with a clamp. You can also simply tie it so that the ball tightly clogs the neck of the bottle.
  6. Attach the best storage container to the wall or cabinet, put a bowl under it.
  7. Filling the container with food, demonstrate a four-legged pet, how to get food yourself, pulling the ball.
  1. Make several holes in the container. That the pet did not get hurt on sharp edges, they must be singeed or treated with sandpaper.
  2. Put cat toys and treats in the container and hand them to your four-legged pet.
  1. Remove the mechanism from the watch.
  2. Draw a line on the surface of the jar, departing 3. 5–4 cm from its base. Cut it according to the outline you made. So that the tailed pet does not get hurt on sharp edges, they must be processed – turned or melted.
  3. Cut out a blank from the board that matches the size of the clockwork.
  4. Make a clay bowl for cat food. It should have 4 compartments and a recess for the clock mechanism in the middle. It must match the size of the container. As soon as the clay blank hardens, it must be fired at a 200-degree temperature for several hours. It is recommended to place it in a cold oven, otherwise it will crack. This step can be skipped if you can find a suitable size cat food container.
  5. Wrap the clock hand bent in half with adhesive tape and fix it on the mechanism.
  6. After inserting a battery into it, fix it with wire in the recess in the food bowl.
  7. Cut a plywood or plastic lid according to the diameter of the container.
  8. Pierce it in the middle to later insert the screw for fastening the arrows.
  9. Cut a piece on the lid that matches the size of the food compartment in the container.
  10. Drive 2 cloves into it. They should not protrude above the lid and between them should be placed a clock hand wrapped with tape. Their sharp ends must be removed so that they do not come into contact with the watch case.
  11. Cut out a small piece of plywood.
  12. Attach a metal pin on its bottom to attach the second hand.
  13. After inserting the second hand into the pin, cut off its protruding elements and seal with adhesive tape.
  14. Install the smaller cover on the larger one.
  15. Attach suction cups to the base of the finished best storage container for its stability.

Making an auto feeder for cats with your own hands

Diet is one of the main criteria for health. Eating is a much more important procedure than it seems, not only for humans, but also for animals. Cat owners understand that they need to provide their pets with a special feeding regimen, but not everyone has the opportunity to be near them around the clock. In such situations, automatic cat feeders come to the rescue. It is very easy to make such a design with your own hands.

Do-it-yourself automatic feeder for cats No. 3 (puzzle)

• Plastic container with lid/plastic bottle

We make several holes of various sizes in a plastic container / bottle. If the edges of the holes are too sharp, they can be singeed. We put cat toys and treats in the container and hand it to the cat.

Below the text is a video instruction for making an interactive cat feeder

Do-it-yourself automatic feeder for cats No. 4 (puzzle)

Another popular type of auto feeder that is easy to make with your own hands is a puzzle auto feederch game feeders consist of assorted tubes, posts, molds, etc. Arranged on a plank or even on a shoe box lid. Food or cat treats are scattered around the puzzle, and the cat tries to get all the pieces and eat them.

An example of a cat feeder puzzle can be seen in this video:

Design Benefits

First of all, you should understand why an automatic feeder is good and why it is so indispensable for pets. The main feature of this design is the portioned serving of food. This property is very important, since all cats can be classified into several groups:

Most often it is the third type that can be found – the glutton. The problem is that they cannot control the amount of food they eat. Even if the owner leaves food in the bowl for several days, the cat will eat everything in 2-3 approaches. Of course, it is impossible to allow excessive glut and subsequent hunger, because in this case the cat’s digestive system will suffer.

Installing a feeder with an automatic feed mechanism will help to successfully distribute the load on the animal’s digestive system. In addition, such a design will be useful when the owner wants to form a certain food discipline in the pet. There are a number of reasons why it is recommended to purchase or make your own automatic cat feeder:

  1. Many pets like to eat at night, late in the evening, and also early in the morning. Automatic adaptation is convenient because the owner does not have to get out of bed to feed the pet in the dark.
  2. The next argument is the optimal diet for a cat. It is preferable that the animal eat every 1. 5-2 hours, but in small portions. In this case, such a device will become an indispensable assistant.
  3. Another reason to get an automatic feeder is the predatory nature that lives in every animal, despite domestication. The basic instinct of cats is self-extraction of food. The purchased design will not be able to provide game elements, but a home-made unit can easily cope with this purpose.

If the owner is attentive to his pet, you need to think about making the device yourself. Even a novice master who does not have any special knowledge or education can make an automatic feeder for a cat with his own hands.

Of course, you can go to a pet store and buy a fancy device equipped with a timer and other functions, but the cost of such best storage containers varies from 3 to 20 thousand

How to make a do-it-yourself cat feeder

I have a Maine Coon that weighs over 10 kilos. His name is Duke. The cat loves to bask in the sun, watch the birds and… wake me up at 5 am so that I give him breakfast.

As you can imagine, if a 10 kg cat sits on your chest early in the morning, then you have no choice but to wake up, take in more air and feed the animal. You ask, “why not buy a feeder for animals? “.

So, the answer lies in the fact that it is very boring and simple. Instead, I wanted to make my own automatic cat feeder. As an engineering student, I had completed many projects and was ready to take on the challenge, but could I build an electronic feeder that would cost less than $100?

The main idea of the project will be to keep under $100 and see what can be used to make a simple cat feeder.

Here is a list of our parts:

  • Grain dispenser/dispenser (I used Home Basics – $17. 75 on eBay)
  • Continuous rotation device (I used SPRING SM-S4303R JR – $8. 90 on eBay)
  • Board for projects (plywood) 30*30*0. 5 cm
  • Arduino Uno R3, 16 Hz – ($3. 50 on eBay)
  • Right side corners 10 * 1 cm (cost around $1. 97)
  • Packing nuts, screws, bolts~1. 3 cm (cost around $1. 18)
  • Rectangular PVC elbow~5 cm (cost about $. 98)

Initially, I thought to collect everything on my knee, but the more I thought about the project, the more difficult it became. And then I thought: “Is there already something designed for dosing that would be cheap and that could be easily modified? ”And voila – there are ready-made grain dispensers on sale, they can be easily modified and connected to the drive.

Step 3: Servo/Crank Assembly

The first I did was to modify the crank, which was in the grain dispenser. I cut off all the ledges so that only the central cylinder remains. After a little grinding, I managed to fix the small disk of the servo drive on it with screws. After that, everything that was left was to do is attach the disk to the servo.

Note: I strongly recommend that you buy a set of servo drives and different nozzles, as your grain dispenser may have other sizes of the crank.

Step 4: front panel

After that, I designed the front panel of the auto feeder for cats. I cut out a piece of a board of the desired size, so that it suits the front well and covered all the electronics that will be behind it. As soon as I cut out and polished the board, I attached 4 corners to it, with which you can fix the board on the feeder. I drilled 2 holes in the feeder case on each side and attached the board with bolts and nuts.

Step 5: Dosage funnel

This was the simplest part of the project. I circled the output of the tube on the front panel, then attached the tube with hot glue to the output of the grain dispenser.

Note: double-check that the tube and front panel sit well before you fasten the tube on hot glue.

Step 6: fix the servo drive

Now that most of the work is completed, you can fix the servo drive so that it does not move during operation. I took two wooden screws and screwed the servo through the holes directly to the wood.

Step 7: Programm Arduino

Now the most cheerful part is coming. We need to program Arduino so that he gives food at a certain time of the day. I tried to make the code as simple as possible. Based on age, weight and breed, I looked at how many and how often Duke should eat during the day to be full. Automatic feeding was tuned in 0. 65 cups every 8 hours. The time and amount of food can be easily modified depending on the need of your pets. The pinout will remain the same.

Step 8: Connect and test

Now that the code is ready, we can connect Arduino and servo drive. The connection is as follows:

  • Black servant wire goes to GND Arduino
  • The red drive of the servo drives at 5V arduino
  • The white mains of the servo drives on PIN 13 Arduino

After you check that everything works correctly, you can fix Arduino in place. To protect my board, I created the case on the 3D printer and simply glued it inside the feeder on hot glue.

The final improvement was the addition of legs to the feeder so that it rises above the bowl. 5 cm wooden boards were used as legs. I glued foam to their bottom part – it protected the floor from scratches. All that remains to be done is to glue the legs themselves to the feeder.

Step 9: Finished Feeder

In the photo you see the finished result. The project cost $39. 18 (about $2300). And I hope it inspires you to build your own automated pet feeder.

Important Criteria

You can evaluate a best storage container purchased and made by yourself, based on a list of certain factors. Some of them:

  1. First of all, you need to think about hygiene, which is often determined by the material of the case. For example, budget plastic devices often emit harmful substances, absorb pollution, and exude an unpleasant odor for cats. The pet may refuse to eat from such a feeder, and if agreed, subsequent poisoning is possiblech an outcome cannot be allowed.
  2. The next important factor is safety. When buying a device, you should pay attention to various little things. So, if the design is not strong, then in the event of a breakdown, the parts can harm the pet. In addition, when the best storage container contains loosely fixed decor elements in the form of butterflies, fish or bows, you need to understand that if they fall off, the animal will eat them along with the food.
  3. An important aspect is the strength of the device. A person should take into account that the intelligence of a cat is at the level of a child of 3-4 years old, so it will be simply impossible to explain something to an animal. Scolding a cat for overly active interaction with the structure is unacceptable, as she may think that the owner forbids her to eat from the feeder.
  4. The game moment is also an important factor that will remind the pet of the nature of a predator. To maintain normal mental and physical health, the cat must be given the opportunity to fight for food. It is very good if the feeder dispenser is made in the form of some kind of toy so that the food spills out when interacting with it.

Mr. Cat recommends: how to make a do-it-yourself cat feeder

There can be many options for automatic feeders, we will talk about them later in the article. Many of them the owner of the animal can do with his own hands – slow-motion, automatic, interactive, smart, swing feeders, automated with a dispenser and a timer. Consider here some designs that are quite simple to make yourself.

A simple plastic bottle feeder

This design is also very easy to manufacture and will serve as an excellent replacement for a ready-made purchased auto feeder.

  • Two plastic five-liter bottles;
  • Cutting tool – scissors or stationery knife;
  • Scotch;
  • Awl;
  • Glue gun.

The order of work on the manufacture of the device is as follows:

  • Cut off the bottom of one of the containers and make a kind of pallet out of it.
  • The second bottle will serve as a container for food – at the very bottom of it, a small hole should be cut at the height of the pallet.
  • Insert the container into the tray.
  • Fasten the parts together with a glue gun or an awl and tape.
  • Pour the dry mixture into the container.

The tray will serve as a bowl where the food will gradually pour under its own weight as the cat eats the pellets.

How to make such an automatic feeder, see the video:

The simplest design of the feeder

What needs to be prepared:

  • A wooden board, an ordinary cutting board for the kitchen is suitable.
  • Disposable cups of different volumes and heights, any other plastic containers, such as cupcake molds.
  • Fasteners.
  • Screwdriver.
  • Glasses are placed on the plank arbitrarily.
  • They are screwed to this peculiar foundation.
  • Dry food is poured into the container in the amount of the required single dose in each.

First of all, the animal will definitely eat a dry mixture from a container that is wider and lower than the others and, therefore, is most convenient for the pet. When the cat is thoroughly hungry, he will move on to the next cup, not as comfortable as the first. The last thing the cat will get food from is the narrowest and highest glass.

Watch feeder

This auto feeder is a little more difficult to manufacture.

  • A mechanism to be removed from an old wall clock.
  • Batteries for quartz watches.
  • An empty, low and wide metal can with non-sharp edges, for example, from candies or snacks.
  • A little clay for creativity that does not require firing.
  • Plywood sheet of small thickness.
  • Glue.
  • Fasteners. It can be adhesive tape with two adhesive surfaces or electrical tape.
  • Four rubber suction cups of small diameter.
  • Fast drying paint without toxic substances.
  • Tools for work – a jigsaw or a wood file, a hammer, a screwdriver, a brush.

Plastic best storage container

This version of the cat feeder today can be called the most popular. The device would be fairly classified as mechanical, because it does not have sensors, timers and other modern options. But as the amount of feed decreases, it is automatically added to the container. These designs have the following advantages:

  • Ease of manufacture;
  • Minimal investment of time and money is required;
  • Best storage containers are highly efficient.

It doesn’t take many tools to make a plastic pet feeder. It is enough to take two containers, the total volume of which will be in the range of 5-7 liters, an awl, scissors, and also adhesive tape. The step by step assembly procedure is as follows:

  1. Take one bottle and cut off the bottom of it. The height of the latter should be approximately the length of a finger.
  2. Cut the resulting container on one side in such a way as to completely cut off the wall. On the other two sides, the walls also need to be shortened, and the fourth should be left unchanged.
  3. Then you can start working with the second container. On one side, at the very bottom, a hole should be made, the height of which will correspond to that of the sides of the first pallet.
  4. Insert the pallet into the resulting hole.
  5. Paste the formed structure with adhesive tape. It is desirable that the parts fit as closely as possible to each other. This is necessary to improve the stability of the best storage container.

Interactive device

Experts in the field of veterinary medicine believe that the element of play in the process of eating food improves the condition of the pet. Despite domestication, it is necessary to awaken the instincts of a pet. This task is perfectly handled by a cat feeder with a dispenser. It is not difficult to build such a structure with your own hands, the main thing is that there is a desire to please the pet.

The process of making a hybrid of a bowl and a toy does not take much time. The first step is to prepare all the necessary details for work. These include:

Make a dormant container for dog food Automatic feeder to ensure

Make a dormant container for dog food

  • Plastic bottle with a volume of 0. 5-1 l;
  • Wire;
  • Stationery gum;
  • Scissors;
  • A plastic container, which must have a factory lid;
  • Small ball;
  • Awl;
  • Paper clip.

First you need to cut the neck from a plastic bottle. Then, in the bottom of the container, a hole should be made, the diameter of which will correspond to the neck of the bottle. The latter should fit tightly into the resulting lumen, do not stagger and not fall out. You need to close the container with a lid.

Make a hole in the lid with an awl. Pierce the ball with wire, fix the elastic on its other end. Expand the latter along with the ball through the neck of the bottle and the hole made.

Press or fix the elastic band with a clamp, having previously tied the tip with a nodule. Adjust the length and tension so that the ball tightly fit the hole in the neck.

At the next stage, you need to fix the auto feeder so that it hangs on the wall above the cat’s bowl. Then you need to pour food into the container and check the performance of the design: so that the food gets into a bowl, you need to twitch the ball. Now the owner has the most difficult thing – to teach a cat to get food. When the pet masters, he will be able to eat and have fun at the same time, independently adjusting the size of the portions.

The owner should not worry about the fact that the cat can eat a lot of food at a time. The animal is very quickly tired of the game with the ball, and at a time not such a big portion falls. Therefore, in order to eat well, the cat should work hard, which the lazy people do not like by nature.

Auto feeding for cats with your own hands No. 2 (interactive)

• A plastic container with a lid (for example, from under the barbecue or mayonnaise)

• plastic bottle 0. 5-1 l

• CAT ball

• Paper clip

Cut off the neck from the bottle. We cut a hole in the bottom of the container so that the neck of the bottle is tightly kept inside it. Close the container with a lid. We pierce the lid with an awl. We pierce the ball with wire and fasten the elastic band to the wire. We stretch the elastic band through the neck of the bottle, a container and a hole in its lid. We fix the gum with a clamp for paper or simply tie it with a knot so that the ball tightly plugs the neck of the bottle.

We fasten the feeder to the wall or cabinet, put a bowl under it. We fill the container with food and show the cat how to get food.

The creation of an intelligence feeder is clearly shown in the video

Awriter

In the manufacture of such a feeder, the emphasis is not on the automatic entry of food, but on the involvement of the cat in the process of obtaining it. The design is made from simple and affordable materials, the whole process will take no more than 10-15 minutes. To work, you will need a minimum of materials – a plastic container with a volume of 5-6 liters or a container with thick walls, a clerical knife, a lighter. The manufacturing process is as follows:

  1. First, you need to make many wide holes in the container. The size of the latter should be such that the cat can easily stick its paw into them.
  2. The edges of the resulting holes will be very sharp. To protect the animal from injury, you should singe them with a lighter. Then inside through the neck you need to pour food, various goodies and toys.
  3. The result is a rattle toy containing not only food, but also various items for entertainment. The success of such a best storage container is guaranteed.

Care rules

The automatic feeder is a very convenient design, and if it is made by hand, it is also budgetary, so we can say with confidence that the device is beneficial in all respects. But it must be borne in mind that the feeder is different from ordinary bowls, when caring for it, you must adhere to certain rules.

Such units must be washed thoroughly. Remains of food can get stuck in the cracks of the structure and remain on its walls. Because of this, a large number of bacteria will accumulate in the feeder, which, if ingested by the cat, can provoke the occurrence of various pathological conditions, for example:

  • Violations in the work of the pancreas;
  • Acne on the chin;
  • Vomiting, indigestion;
  • Oral lesions.

Each animal should have its own feeder. Of course, if the cats live together and are ready to eat from the same device, this is very good. However, cats are often jealous of their dishes, so it is advisable to make a separate copy for each pet.

If the pet eats dry food, there must be a container with clean water next to the feeder. Since the animal will not only eat, but also play, the likelihood of fluid loss increases. It must be completed without fail.

It will not be difficult for a caring owner to spend some free time to make an automatic feeder for his pet. Any cat will be happy with such a gift and will repay the owner with caress and warmth.

Automatic cat feeder

Thanks to the automatic feeder, your cat will always have enough food. This is especially necessary if you plan to be absent at home longer than usual. Automatic feeder to ensure that your cat is well-fed. But where to get such a miracle-condemnation? Option one – buy. The cost of such feeders depends on the configuration, manufacturer, type and ranges from 900-12 700

Option two – make an automatic feeder for a cat with your own hands from improvised means. This method will help you not only save the family budget, but also show your creative abilities.

Automatic feeder for a cat made of plastic bottles

You can also make zoogadet from plastic bottles. For this you will need:

  • Five-liter plastic bottles – 2 pcs;
  • Scissors or stationery knife;
  • Glue gun;
  • Lace;
  • Awl.

How to make an automatic feeder for a cat from bottles with your own hands:

  1. Cut the bottom at one of the plastic bottles with scissors or a stationery knife. Then cut the bottom of the jar so that you get a kind of scoop. This is a future fodder tray;
  2. In the second can, cut off the holes at the bottom of the pallet;
  3. Insert the pallet into the resulting hole;
  4. Fix the feeder with glue or awl and lace;
  5. Pour the feed into the finished feeder.

Take a note: an automatic feeder for a cat from plastic bottles is suitable only for dry feed. It is convenient to use such a zoogadget if several tailed pet lives in the house.

Auto feeding for cats with your own hands No. 1 (simple)

Perhaps simple auto feeders, i. E. Not equipped with mechanisms – this is the case when it is better to work a little than to spend money in a pet store.

• 2 plastic bottles of water 5-8 liters

• adhesive pistol \ flat lace \ tape

At one bottle we cut off the bottom and cut out the pallet from it so that it resembles a scoop in the shape of a scoop: we leave the side in front, remove them from the sides by half, remove everything from the back. In the second bottle we cut out a small hole at the very bottom, the same height as the sides of the pallet. We insert the pallet into the hole and attach it to the bottom of the bottle using glue or awl and cord \ plastic tape. Do not forget to fasten with the main bottle and edges of the sides of the pallet.

We fall asleep the food into the bottle, and it wakes up into the pallet as it is devastated under the influence of gravity.

How to make such an auto feed on your own can be seen on the video presented in the video

Automatic feeder for a cat from a plastic container

This type of zoogadget, unlike the two previous dog food containers, works only when the cat “asks” for it. But, everything is in order. To make a feeder you will need:

  • Plastic container with handle;
  • Plastic bottle;
  • Binder (clerical clip);
  • A small ball (the diameter should be slightly larger than the neck of the bottle);
  • Paper clips;
  • Elastic rope (a tight elastic band is suitable);
  • Scissors or utility knife.

Step-by-step instruction:

  • Cut the bottle so that it is as long as a plastic container;
  • Cut a small circle in the bottom of the container so that the neck of the bottle fits into it;
  • Make holes in the lid of the plastic container;
  • Insert the plastic bottle into the container;
  • Tie the ball with a string, pull it through the neck of the bottle, fasten it in the holes of the lid;
  • Pour the food into the bottle, fix the plastic container at such a height that your cat can easily reach it with its paw;
  • Install a feeder under the structure.

Note: This type of automatic feeder is only suitable for dry food. The principle of operation of this zoo gadget is quite simple: the cat hits the ball with its paw, and food is poured into the bowl.

In order for your tailed pet to use such a feeder on its own, you will need to show it how it worksch an automatic feeder is not only a great alternative to purchased pet gadgets, but also a great intellectual toy for a cat.

Feeder for a cat from a plastic bottle

Most cat owners are often away from home, leaving the animal alone. However, it should be remembered that the pet needs to be fed. And in the absence of the owner, this is problematic. After all, if you leave a large bowl of dry food before leaving, then after a while it will become stale and unattractive. Also, a cat, playing, can scatter its food throughout the apartment.

To avoid the above problems, we advise you to make a cat feeder. It is a plastic bottle filled with food. And at the bottom there is a plug that the pet will pull back when it wants to eat.

Materials and tools – Round plastic container;- Bottleneck: – Clerical clip;- Stationery gum (2 pcs);- rubber ball;— Wire;- Scissors.

Take a plastic container, such as a yogurt container. It must have a lid so that the food in the feeder does not dry out. Using scissors, cut a hole with a radius of 3 centimeters in the bottom of the container. Make a small hole in the center of the lid.

Now we need a bottle neck – from a regular PET bottle. It must be inserted into the hole in the bottom of the container.

Attach a wire to the rubber ball, and then tie an elastic band to the wire.

Pull the opposite end of the elastic through the notch in the lid of the container. You can fix the elastic band with a clerical clip.

Contents

Shanna Derrick About Author

Author of dog food articles with a deep understanding of healthy dog nutrition.

No Comments

    Leave a Reply